1. Clean the inlet with water before each discharge to ensure that the inlet is wet during discharge.

2．在放料的另外向隨車內置的清理自來水水箱中灌滿水。

2. In addition to discharging, fill the cleaning tap water tank built in the car with water.

3．放料后清理入料口，清理入料口周邊殘余的混凝土。

3. After discharging, clean the inlet and the residual concrete around the inlet.

4．到工地卸料后，清理出料槽，隨后向混凝土儲罐里加清理自來水30—40L；在車輛回程時確?；炷羶拚蚵俣刃D。

4. After unloading at the construction site, clean the discharge chute, and then add 30-40l clean tap water to the concrete storage tank; when the vehicle returns, ensure that the concrete storage tank rotates at a positive slow speed.

5．下一次放料前謹記排掉混凝土儲罐內的廢水。

5. Remember to drain the waste water in the concrete storage tank before the next discharge.

6．每日下班時完全清理混凝土儲罐及進出料口周邊，確保不粘有水泥及混凝土結團。

6. Clean the concrete storage tank and the periphery of the inlet and outlet at the end of the day to ensure that there is no cement and concrete agglomeration.

此文是由攪拌車今天為您提供的精彩內容，更多的精彩內容請點擊進入網站http://www.kunapops.com進行查看，更多的精彩內容可點擊相關的頁面查看.

This article is a wonderful content provided by Zhongke Jufeng mixer today. For more wonderful content, please click to enter the website http://www.kunapops.com To view, more wonderful content can click on the relevant page to view